coating speed meaning in Chinese
涂布速度
Examples
- Results showed that the factors include : solvent and concentration of limn204 precursor solution , spin - coating speed , heating speed , sintering temperature and time etc . in the end , techniques of sintering under vacuum conditions were studied
主要有以下几方面:溶液中离子总浓度以及分散剂浓度对成膜质量的影响;旋转涂覆时转速、热处理的升温速度、烧结温度、烧结时间对薄膜晶型结构及性能的影响。 - The ultrasonic can also afford the energy that the electroless plating need so that the coating speed is rapider than the normal low - temperature electroless plating , then reduce the cost . the ultrasonic has great advantage in dispersion compared with the normal mechanical mixing
同时相比较传统的机械搅拌分散工艺，超声波分散具有明显的优势，可以大大提高颗粒的分散性，使复合粉末中各组成更为均匀。 - Theoretical analysis and experimental results showed that the high emissivity coating speeds up the heat - absorption and heat release process , strengthens heat transfer by radiation and heat conduction in the regenerator , improves heat transfer efficiency and the blast temperature
理论分析和实验结果表明，热风炉蓄热体表面高发射率涂层可以提高蓄热体的蓄热和放热能力，强化炉内辐射传热和蓄热体的导热，从而提高热风温度。 - Best concentration of ions is 1 . 5mol / l and dispersant pvp monomer 0 . 8mol / l . spin - coating speed , which affected the quality of limn2o4 film greatly , was also studied . it demonstrated that smooth limn2o4 film without cracks could formed under 2000 rotates / min with the solution cion = 1 . 5mol / l , cpvp = 0 . 8mol / l , what ’ s more , fewest spin - coating times were needed at that speed
实验结果表明:采用离子总浓度溶液为1 . 5mol / l ,聚乙烯吡咯烷酮单元浓度为0 . 8mol / l的溶液旋转涂覆时,转速在2000转/分钟时最佳,所得到的湿limn204薄膜平整光滑均匀,加热后无龟裂现象。